前言
代码已同步至 gitee：2023NOJ（C语言版）！
题目过于垃圾和睿智，做这种题简直是浪费生命，甚至会让代码水平剧烈下降，也就81-90题值得做一下，有这功夫不如多打会儿游戏。
贴出 100 题中全部AC 代码，并不保证代码正确性、可读性、简洁性、最佳性，只能保证AC；目前 4 道题 WA，还有 5道题使用 CPP。具体情况如下：
- 41-50：飞机起飞速度（WA）；
- 51-60：字符串替换（WA）；
- 61-70：GPS通信协议（CPP）；
- 71-80：卫星定位（WA），日出日落时间（WA），火箭发射模拟（CPP），晶体结构（CPP），原子计数（CPP）；
- 81-90：危险的组合（CPP）。
考试模板
作者考试时会携带的资料如下：
// 字符串操作函数(常用)// 为避免内存泄漏和野指针问题, 通常只能对开在栈上字符串使用, 而不能对开在堆上的字符串使用# include // 失败时均返回NULLvoid *memset(void *str, int c, size_t n); // 复制字符c到str的前n个字符.// 使用memset对数组初始化时, 字符c只能为0或-1或0x3f.void *memcpy(void *dest, const void *src, size_t n); // 从src复制n个字符到dest, 一般不用于src和dest内存重叠的情况.void *memmove(void *dest, const void *src, size_t n); // 从src复制n个字符到dest, src和dest内存重叠时推荐使用.size_t strlen(const char *str); // 返回str长度, 即头指针到'\0'的距离(但不包含'\0').char *strcat(char *dest, const char *src); // 将src追加到dest结尾.char *strchr(const char *str, int c); // 返回str中第一次出现字符c的位置.char *strstr(const char *haystack, const char *needle); // 返回在haystack中第一次出现needle的起始位置.size_t strspn(const char *str1, const char *str2); // str1中第一个不在str2出现的字符的下标char *strtok(char *str, const char *delim); // 以delim为分隔, 分解str.// 字符串操作函数(常用)// 为避免内存泄漏和野指针问题, 通常只能对开在栈上字符串使用, 而不能对开在堆上的字符串使用# include // 失败时均返回NULLvoid *memset(void *str, int c, size_t n); // 复制字符c到str的前n个字符.// 使用memset对数组初始化时, 字符c只能为0或-1或0x3f.void *memcpy(void *dest, const void *src, size_t n); // 从src复制n个字符到dest, 一般不用于src和dest内存重叠的情况.void *memmove(void *dest, const void *src, size_t n); // 从src复制n个字符到dest, src和dest内存重叠时推荐使用.size_t strlen(const char *str); // 返回str长度, 即头指针到'\0'的距离(但不包含'\0').char *strcat(char *dest, const char *src); // 将src追加到dest结尾.char *strchr(const char *str, int c); // 返回str中第一次出现字符c的位置.char *strstr(const char *haystack, const char *needle); // 返回在haystack中第一次出现needle的起始位置.size_t strspn(const char *str1, const char *str2); // str1中第一个不在str2出现的字符的下标char *strtok(char *str, const char *delim); // 以delim为分隔, 分解str.// 指针数组模板#include #include typedef struct {char id[64];int a;int b;} PointerArray;int main(){int n; scanf("%d", &n);PointerArray *arr[n];for (int i = 0; i id, &arr[i]->a, &arr[i]->b);}for (int i = 0; i id, arr[i]->a, arr[i]->b);return 0;}// 二维数组模板#include #include int** init(int n) {int** matrix = (int**)malloc(sizeof(int*) * (n + 1));for(int i = 0; i <= n; i++) {matrix[i] = (int*)malloc(sizeof(int) * (n + 1));}return matrix;}int op(int **matrix, int n);int main() {int n;scanf("%d", &n);int **matrix = init(n);for (int i = 1; i <= n; ++i) {for (int j = 1; j <= n; ++j) {scanf("%d", &matrix[i][j]);}}printf("%d", op(matrix, n));return 0;}// 快速排序模板: 从小到大void quickSort(int arr[], int left, int right) {if (left >= right) return;int flag = arr[(left + right) / 2];int head = left - 1, tail = right + 1;while (head < tail) {do head++; while (arr[head] flag); // 若从大到小需修改本行if (head < tail) {int tmp = arr[head];arr[head] = arr[tail], arr[tail] = tmp;}}quickSort(arr, left, tail);quickSort(arr, tail + 1, right);}// 冒泡排序模板: 从小到大#include void bubble(int arr[], int n) {for (int i = 0; i < n - 1; ++i) {bool flag = false;for (int j = 0; j arr[j + 1]) { // 若从大到小需修改本行int tmp = arr[j];arr[j] = arr[j + 1], arr[j + 1] = tmp, flag = true;}}if (!flag) break;}}// 二分查找模板long long left = 1, right = 1e19, mid, ans;while(left > 1) + left;if (isLeft(mid)) right = mid - 1, ans = mid;else left = mid + 1;}// 文件读写模板#include #include int main(){int n; scanf("%d",&n);FILE *file = fopen("rr.dat", "w");for(int i=1;i<=n;i++)fprintf(file, "%d\n", i);fclose(file);file = fopen("rr.dat", "r");while (fscanf(file, "%d", &ans) == 1)printf("%d ", ans);fclose(file);}1-10
Hello World
#includeint main(){printf("Hello World");return 0;}A+B
#includeint main(){int a = 0, b = 0;scanf("%d %d",&a,&b);int c = a+b;printf("%d",c);return 0;}数据类型大小及范围
#include #include int main(){int id = 0;scanf("%d",&id);switch (id) {case 1: // charprintf("%llu,%d,%d\n",sizeof(char),CHAR_MIN,CHAR_MAX);break;case 2: // unsigned charprintf("%llu,%u,%u\n",sizeof(unsigned char),0,UCHAR_MAX);break;case 3: // shortprintf("%llu,%hd,%hd\n",sizeof(short),SHRT_MIN,SHRT_MAX);break;case 4: // unsigned shortprintf("%llu,%hu,%hu\n",sizeof(unsigned short),0,USHRT_MAX);break;case 5: // intprintf("%llu,%d,%d\n",sizeof(int),INT_MIN,INT_MAX);break;case 6: // unsigned intprintf("%llu,%u,%u\n",sizeof(unsigned int),0,UINT_MAX);break;case 7: //longprintf("%llu,%ld,%ld\n",sizeof(int),LONG_MIN,LONG_MAX);break;case 8: // unsigned longprintf("%llu,%u,%lu\n",sizeof(unsigned long),0,ULONG_MAX);break;case 9: // long longprintf("%llu,%lld,%lld\n",sizeof(int),LLONG_MIN,LLONG_MAX);break;case 10: // unsigned long longprintf("%llu,%u,%llu\n",sizeof(unsigned long long),0,ULLONG_MAX);break;}return 0;}平均值
#include int main(){int a = 0, b = 0;scanf("%d %d",&a,&b);int c = ((b-a)>>1)+a;printf("%d",c);return 0;}进制转换
#include int main(){unsigned int a = 0;scanf("%d",&a);printf("%X,%o",a,a);}浮点数输出
#include int main(){double a = 0.0f;scanf("%lf",&a);printf("%.6lf,%.2lf,%.8lf",a,a,a);return 0;}动态宽度输出
#include int main(){int n = 0, m = 0, k = 0;scanf("%d %d",&n,&m);int tmp = n;while (tmp) {tmp /= 10;++k;}for (int i = 0; i < m-k; ++i) {printf("%d",0);}printf("%d",n);return 0;}计算地球上两点之间的距离
#include #include #define RADIUS 6371.000000#define PI 3.1415926int main(){double phi1, phi2, lambda1, lambda2, distance;scanf("%lf %lf",&phi1,&lambda1);scanf("%lf %lf",&phi2,&lambda2);phi1 = phi1*PI/180;phi2 = phi2*PI/180;lambda1 = lambda1*PI/180;lambda2 = lambda2*PI/180;double havRatio = (1-cos(phi2-phi1))/2+cos(phi1)*cos(phi2)*(1-cos(lambda2-lambda1))/2;distance = asin(sqrt(havRatio))*2*RADIUS;printf("%.4lfkm",distance);return 0;}风寒指数
#include #include int main(){double v,T;scanf("%lf %lf",&v,&T);int chill = 13.12f+0.6215f*T-11.37f*pow(v,0.16f)+0.3965f*T*pow(v,0.16f)+0.5f;printf("%d",chill);return 0;}颜色模型转换
#include #include #include double findmax(double a, double b, double c) {return a >= b ? (a >= c ? a : c) : (b >= c ? b : c);}double findmin(double a, double b, double c) {return a <= b ? (a <= c ? a : c) : (b 0 ? R : 0) / 255.0f);g = (double)((G > 0 ? G : 0) / 255.0f);b = (double)((B > 0 ? B : 0) / 255.0f);max = findmax(r, g, b);min = findmin(r, g, b);V = max;if (max < 1e-9) {S = 0.0f;}else {S = (max - min) / max;}if (max - min < 1e-9) {H = 0.0f;}else {if (max == r) {H = 60.0f * (g - b) / (max - min);}else if (max == g) {H = 60.0f * (2.0f + (b - r) / (max - min));}else if (max == b) {H = 60.0f * (4.0f + (r - g) / (max - min));}else {return -1;}if (H < 1e-9) {H = H + 360.0f;}}printf("%.4lf,%.4lf%%,%.4lf%%", H, S * 100, V * 100);return 0;}11-20
乘数模
#includeint main(){long long a,b,m,r;scanf("%lld %lld %lld",&a,&b,&m);r = ((a%m)*(b%m))%m;printf("%lld",r);return 0;}方阵
#includeint main(){int n,m;scanf("%d",&n);for (int i = 0; i < n; ++i) {for (int j = 0; j 0 ? (i-j) : (j-i);printf("%d",m);}printf("\n");}return 0;}分数的加、减、乘、除法
#includeint gcd(int a,int b){if (b == 0) return a;else return gcd(b,a%b);}int main(){int aTop, aBot, bTop, bBot;scanf("%d",&aTop);getchar();scanf("%d",&aBot);getchar();scanf("%d",&bTop);getchar();scanf("%d",&bBot);getchar();int addTop, addBot, subTop, subBot, multTop, multBot, divTop, divBot;int addGcd, subGcd, multGcd, divGcd;addTop = aTop*bBot+aBot*bTop;addBot = aBot*bBot;addGcd = gcd(addTop,addBot);addTop /= addGcd;addBot /= addGcd;subTop = aTop*bBot-aBot*bTop;subBot = aBot*bBot;subGcd = gcd(subTop,subBot);subTop /= subGcd;subBot /= subGcd;multTop = aTop*bTop;multBot = aBot*bBot;multGcd = gcd(multTop,multBot);multTop /= multGcd;multBot /= multGcd;divTop = aTop*bBot;divBot = aBot*bTop;divGcd = gcd(divTop,divBot);divTop /= divGcd;divBot /= divGcd;printf("(%d/%d)+(%d/%d)=%d/%d\n",aTop,aBot,bTop,bBot,addTop,addBot);printf("(%d/%d)-(%d/%d)=%d/%d\n",aTop,aBot,bTop,bBot,subTop,subBot);printf("(%d/%d)*(%d/%d)=%d/%d\n",aTop,aBot,bTop,bBot,multTop,multBot);printf("(%d/%d)/(%d/%d)=%d/%d\n",aTop,aBot,bTop,bBot,divTop,divBot);return 0;}操作数
#includeint sumDig(int n){int sum = 0;while(n){sum += n%10;n /= 10;}return sum;}int main(){int n,cnt=0;scanf("%d",&n);while(n){n -= sumDig(n);++cnt;}printf("%d",cnt);return 0;}组合数
#includeint main(){int cnt = 0, n, m;scanf("%d",&n);for(int a = 0; a <= 9; ++a){for(int b = 0; b <= 9; ++b){for(int c = 0; c <= 9; ++c){for(int d = 0; d <= 9; ++d){m = a+b+c+d;if (m == n){++cnt;}}}}}printf("%d",cnt);return 0;}比率
#include#includeint gcd(int a,int b){if (b == 0) return a;else return gcd(b,a%b);}int cntDig(double x){int cnt = 0;while(x != floor(x)){++cnt;x *= 10;}return cnt;}int main(){double x;scanf("%lf",&x);int cnt = cntDig(x), n, m, g;m = pow(10,cnt);n = (int)(x*m);g = gcd(m,n);m /= g;n /= g;printf("%d/%d",n,m);return 0;}级数和
#include#includedouble decimal (int n){double m = (double)n+1;while(floor(m)){m /= 10;}return m+n;}int main(){int n;scanf("%d",&n);double sum = 0.0f, term;for (int i = 1; i < n; ++i) {term = decimal(i);sum += term;printf("%g+",term);}term = decimal(n);sum += term;printf("%g=%g",term,sum);return 0;}对称数
#include int main(){int n;scanf("%d",&n);int a = (n/100)%10;int b = (n/10)%10;int c = n%10;if ((b == 0 || b == 1 || b == 8) && ((a == 6 && c == 9) || (a == 9 && c == 6) || ((a == 0 || a == 1 || a == 8) && (c == 0 || c == 1 || c == 8)))){printf("Yes\n");} else {printf("No\n");}return 0;}幂数模
#includetypedef unsigned long long uint64;int fastPowerMod (uint64 t, uint64 e, uint64 m){uint64 r = 1;while (e){if (e&1){r = (1LL*r*t)%m;}t = (1LL*t*t)%m;e >>= 1;}return r;}int main(){uint64 a,b,m,r;scanf("%llu %llu %llu",&a,&b,&m);r = fastPowerMod(a,b,m);printf("%llu",r);return 0;}倍数和
#include int main(){unsigned int t = 0;unsigned int arrn[100000];scanf("%u", &t);for(unsigned int i = 0; i < t; i++){scanf("%u", &arrn[i]);}for(unsigned int j = 0; j < t; j++){unsigned int res = 0;for(unsigned int x = 1; x < arrn[j]; x++){if(x % 3 == 0 || x % 5 == 0){res += x;}}printf("%u\n", res);}return 0;}21-30
余数和
#include int main() {unsigned int sum = 0, n, k;scanf("%u %u",&n,&k);for (unsigned int i = 1; i <= n; ++i) {sum += k%i;}printf("%u",sum);return 0;}最大数字
#include #include bool isNonDecr(unsigned int n){unsigned int left;while(n){left = (n/10)%10;if (left > (n%10)){return false;}n /= 10;}return true;}int main() {unsigned int n, res;scanf("%u",&n);while(!isNonDecr(n)){--n;}printf("%u",n);return 0;}倒水（原 AC 后 TE 现又 AC）
#include #include #define INF 0x3f3f3f3fconst int maxSize = 10000;int distTable[10000][10000];int queue[2][10000] = {0};int bfs(int n, int m, int d){int head = 0, tail = 1;memset(distTable, 0x3f, sizeof(distTable));distTable[0][0] = 0;while(tail != head){int a = queue[0][head], b = queue[1][head];if (a == d || b == d) {return distTable[a][b];}++head;if(head == maxSize-1) {head = 0;}// fullif(distTable[a][m] == INF) {distTable[a][m] = distTable[a][b]+1;++tail;queue[0][tail] = a;queue[1][tail] = m;}if(distTable[n][b] == INF) {distTable[n][b] = distTable[a][b]+1;++tail;queue[0][tail] = n;queue[1][tail] = b;}// emptyif(distTable[a][0] == INF) {distTable[a][0] = distTable[a][b]+1;++tail;queue[0][tail] = a;queue[1][tail] = 0;}if(distTable[0][b] == INF) {distTable[0][b] = distTable[a][b]+1;++tail;queue[0][tail] = 0;queue[1][tail] = b;}// pourif(a+b n && distTable[n][a+b-n] == INF){distTable[n][a+b-n] = distTable[a][b]+1;++tail;queue[0][tail] = n;queue[1][tail] = a+b-n;}if(a+b m && distTable[a+b-m][m] == INF){distTable[a+b-m][m] = distTable[a][b]+1;++tail;queue[0][tail] = a+b-m;queue[1][tail] = m;}if (tail == maxSize) {tail = 0;}}return -1;}int main(){int n,m,d;scanf("%d %d %d",&n,&m,&d);printf("%d", bfs(n,m,d));return 0;}好数字
#include typedef unsigned long long uint64;const uint64 mod = 1e9+7;uint64 power(uint64 a, uint64 e){uint64 r = 1;while (e){if (e&1){r = (r*a)%mod;}a = (a*a)%mod;e >>= 1;}return r;}int main(){uint64 n, num;scanf("%llu",&n);num = power(4,n/2)*power(5,n-n/2)%mod;printf("%llu",num);return 0;}毕达哥拉斯三元组
#include unsigned long long pythagoras(unsigned int sum){// a as short catheti, b as long catheti, c as hypotenuseunsigned a,b,c;for (a = 1; a <= sum/4; ++a){for (b = a+1; b c) & (c-a < b) & (a*a+b*b == c*c)){return a*b*c;}}}}int main(){unsigned int n;scanf("%u",&n);printf("%d", pythagoras(n));return 0;}竖式乘法
#include #include typedef unsigned int uint;uint digit(uint x){uint cnt = 0;if (x == 0){return 1;}while(x){x /= 10;++cnt;}return cnt;}uint getDigital(uint x, uint n){x /= (uint)pow(10,n-1);return x%10;}int main(){uint up, down;scanf("%u %u",&up,&down);uint ans = up*down, len = digit(ans)+1, downLen = digit(down);for (uint i = 0; i < len-digit(up); ++i) {printf(" ");}printf("%u\n",up);printf("x");for (uint i = 1; i <= len-downLen-1; ++i) {printf(" ");}printf("%u\n",down);for (uint i = 1; i <= len; ++i) {printf("-");}printf("\n");uint tmp;for (uint i = 1; i <= downLen; ++i) {tmp = getDigital(down,i)*up;if (i == downLen){printf("+");} else {for (uint j = 1; j <= len-digit(tmp)-i+1; ++j) {printf(" ");}}printf("%u\n",tmp);}for (uint i = 1; i <= len; ++i) {printf("-");}printf("\n");printf(" %u",ans);return 0;}查找数列
#include int main(){int cnt = 1, sum = 0, n, res;scanf("%d",&n);while(n-sum > 0){sum += cnt;++cnt;}sum -= cnt;res = n-sum == 0 ? cnt : (n-sum-1);printf("%d",res);return 0;}俄罗斯农夫乘法
#include int main(){int multi = 0, a, b;scanf("%d %d",&a,&b);while(a){printf("%d %d\n",a,b);if (a&1) {multi += b;}a >>= 1;b <<= 1;}printf("%d",multi);return 0;}阶乘倍数
#include #include typedef unsigned long long int64; int64 primeFactNum = 0;int64 prime[20] = {0}, num[20] = {0};bool isMulti(int64 n){int64 primeNum, tmp;for (int64 i = 1; i <= primeFactNum; ++i) {primeNum = 0;tmp = n;while (tmp) {primeNum += tmp/prime[i];tmp /= prime[i];}if(primeNum < num[i]) {return false;}}return true;}void solveFact(int64 k){for (int64 i = 2; i*i 1){++primeFactNum;prime[primeFactNum] = k;++num[primeFactNum];}} int main(){int64 left = 1, right = 1e19, mid, n, k;scanf("%lld",&k);solveFact(k); while(left >1)+left;if (isMulti(mid)){right = mid-1;n = mid;} else {left = mid+1;}}printf("%lld",n);return 0;}方案数
#include int main(){int cnt = 0, n;scanf("%d",&n);for (int i = 1; i*(i+1) <= 2*n; ++i) {if ((n-i*(i-1)/2)%i == 0){++cnt;}}printf("%d",cnt);return 0;}31-40
哈沙德数
#include int HarshadNumber(int n){int t = n, s = 0;while (t) {s += t%10;t /= 10;}if ((s == 0) || (n%s != 0)) return 0;if (s == 1) return 1;return n/s;}int main(){int cnt = 0, n;scanf("%d",&n);if (n == 1) cnt = 1;while ((n != 0) && (n != 1)) {n = HarshadNumber(n);if (n) ++cnt;}printf("%d",cnt);return 0;}素数
#include #include #include typedef unsigned long long uint64;uint64 primeNum(uint64 a, uint64 b){bool isPrime[b+1];memset(isPrime,1,b+1);uint64 cnt = 0;for (uint64 i = 2; i <= b; ++i){if (isPrime[i]){for (uint64 j = 2; j*i <= b; ++j){isPrime[j*i] = false;}}}for (uint64 i = a; i <= b; ++i){cnt += isPrime[i];}return cnt;}int main(){uint64 a,b,num;scanf("%llu %llu",&a,&b);num = primeNum(a,b);printf("%llu",num);return 0;}基思数
#include int arr[8] = {0};int init(int n){int cnt = 0;while (n) {arr[cnt++] = n%10;n /= 10;}return cnt;}void isKeith(int n, int len){int i = len - 1;while (arr[i] < n){int sum = 0;for (int j = 0; j < len; ++j) {sum += arr[(i-j+len)%len];}arr[i] = sum;i = (i-1+len)%len;}if (arr[i] == n) printf("Yes");else printf("No");}int main() {int n;scanf("%d",&n);isKeith(n,init(n));return 0;}二进制表示
#include #include void binary(int a){bool flag = false;for (int i = 15; i >= 0 ; --i) {if ((a>>i)&1) {if (flag) printf("+");if (i >= 2){printf("2(");binary(i);printf(")");}if (i == 1) printf("2");if (i == 0) printf("2(0)");flag = true;}}}int main() {int a;scanf("%d",&a);binary(a);return 0;}光线追踪
#include unsigned int gcd(unsigned int a, unsigned int b){if (b == 0) return a;return gcd(b,a%b);}int main(){unsigned int n,x,l;scanf("%u %u",&n,&x);l = 3*(n-gcd(n,x));printf("%u",l);return 0;}冰雹数列
#include int main() {int n;scanf("%d",&n);while (n != 1) {printf("%d ",n);if (n&1) n = 3 * n + 1;else n /= 2;}printf("1");return 0;}佩尔数
#include int PA(int n){if (n == 0) return 0;else if (n == 1) return 1;return 2*PA(n-1)+PA(n-2);}int PB(int n){int p0 = 0, p1 = 1, pn;for (int i = 0; i <= n; ++i) {if (i == 0) pn = p0;else if (i == 1) pn = p1;else {pn = 2 * p1 + p0;p0 = p1;p1 = pn;}}return pn;}int main() {int n, p;scanf("%d",&n);if (n&1) p = PA(n);else p = PB(n);printf("%d",p);return 0;}可变参数累加
#include #include int sum(int start,...){va_list vaList;int sum = 0;int curr = start;va_start(vaList,start);while (start){sum += start;start = va_arg(vaList,int);}va_end(vaList);return sum;}int main() {int a,b,c,d,e,f;scanf("%d %d %d %d %d %d",&a,&b,&c,&d,&e,&f);int sumMinus = sum(a,b,0) - sum(c,d,e,f,0);printf("%d",sumMinus);return 0;}运动会
#include #include int phiEuler(int n){int phi[n+1],prime[n+1];bool isSieved[n+1];int sum = 0,cnt = 1, comp;prime[0] = 1;phi[1] = 1;for (int i = 2; i < n; ++i){if (!isSieved[i]){prime[cnt++] = i;phi[i] = i-1;}for (int j = 1; i*prime[j] <= n; ++j){comp = i*prime[j];isSieved[comp] = true;if (i%prime[j] == 0){phi[comp] = prime[j]*phi[i];break;} else{phi[comp] = (prime[j]-1)*phi[i];}}}for (int i = 1; i <= n-1; ++i) {sum += phi[i];}return sum;}int main() {int n, num;scanf("%d",&n);num = n == 1 ? 0 : (2*phiEuler(n)+1);printf("%d",num);return 0;}可变参数平均
#include #include double avg(int num,...){va_list vaList;double sum = 0.0f;va_start(vaList,num);for (int i = 0; i < num; ++i) {sum += va_arg(vaList,int);}va_end(vaList);return sum/num;}int main() {int a,b,c,d,e;scanf("%d %d %d %d %d",&a,&b,&c,&d,&e);double avgMinus = avg(2,a,b) - avg(3,c,d,e);printf("%.4f",avgMinus);return 0;}41-50
航空旅行
#include#includevoid pass(int a, int b, int c, int d, int e){bool flag = false;if (a <= e && (b + c) <= d) flag = true;if (b <= e && (a + c) <= d) flag = true;if (c <= e && (a + b) <= d) flag = true;if (flag) printf("YES\n");else printf("NO\n");}int main(){int n, a, b, c, d, e;scanf("%d",&n);while (n--){scanf("%d %d %d %d %d", &a, &b, &c, &d, &e);pass(a, b, c, d, e);}return 0;}蒙特卡罗法求积分
#include #include #include double func1(double x) {return pow(x, 4) * exp(-x);}double func2(double x) {return x * x + 1;}double func3(double x) {return cos(x);}double func4(double x) {return sqrt(x) * (x - 2);}double func5(double x) {return 2 * sin(x) - 5 * cos(x);}double func(int m, double x) {switch (m) {case 1: return func1(x);case 2: return func2(x);case 3: return func3(x);case 4: return func4(x);case 5: return func5(x);default: return 0;}}double mtk(int m, double a, double b, int n) {srand(RAND_MAX);double w = b - a, sum = 0;for (int i = 1; i < n; ++i) {double x = ((double)rand() / RAND_MAX) * w + a;sum += func(m, x);}sum *= w / n;return sum;}int main() {int m, n;double a, b;scanf("%d %lf %lf %d", &m, &a, &b, &n);printf("%.6lf", mtk(m, a, b, n));return 0;}飞机起飞速度（WA）
稀疏矩阵
#include int main () {int raw, col, n, num = 0;scanf("%d %d", &raw, &col);for (int i = 0; i < raw; ++i) {for (int j = 0; j < col; ++j) {scanf("%d", &n);if (n) ++num;}}double ratio = (double)num / (raw * col);if (num == raw || num == col || (ratio - 0.05) <= 1e-9)printf("Yes\n");else printf("No\n");return 0;}回文数之和
#include #include int dec[10] = {0}, kSys[32] = {0};bool isPalindrome(int arr[], int cnt){int head = 0, tail = cnt - 1;while (head < tail) {if (arr[head] != arr[tail]) return false;++head, --tail;}return true;}bool isBiPalindrome(int n, int k){int tmp = n, cnt = 0;while (tmp) {dec[cnt++] = tmp % 10;tmp /= 10;}if (!isPalindrome(dec, cnt)) return false;tmp = n, cnt = 0;while (tmp) {kSys[cnt++] = tmp % k;tmp /= k;}if (!isPalindrome(kSys, cnt)) return false;return true;}int main() {int n, k, sum = 0;scanf("%d %d", &n, &k);for (int i = 1; i <= n; ++i) {if (isBiPalindrome(i, k)) sum += i;}printf("%d", sum);return 0;}完美矩阵
#include #include #define MAXSIZE 301int arr[MAXSIZE][MAXSIZE] = {0};int preSum[MAXSIZE][MAXSIZE] = {0};void prefix(int n, int m){for (int i = 1; i <= n; ++i) {for (int j = 1; j <= m; ++j) {preSum[i][j] = preSum[i - 1][j] + preSum[i][j - 1] - preSum[i - 1][j - 1] + arr[i][j];}}}int getSum(int x1, int x2, int y1, int y2) {return preSum[x2][y2] - preSum[x1 - 1][y2] - preSum[x2][y1 - 1] + preSum[x1 - 1][y1 - 1];}bool isPerfect(int x1, int x2, int y1, int y2) {int outer = getSum(x1, x2, y1, y2), inner;int len = 2 * (x2 - x1 + y2 - y1);if ((x2 - x1) == 1 || (y2 - y1) == 1) inner = 0;else inner = getSum(x1 + 1, x2 - 1, y1 + 1, y2 - 1);if (inner != 1 && inner != 0 && inner != -1) return false;if ((outer - inner) != len) return false;return true;}int perfectNum(int n, int m) {int cnt = 0;for (int i = 1; i <= n; ++i) {for (int j = 1; j <= m; ++j) {for (int k = 1; k + i <= n && k + j <= m; ++k) {if (arr[i][k + j] == 0 || arr[k + i][j] == 0) break;if (isPerfect(i, i + k, j, j + k)) {++cnt;}}}}return cnt;}int main () {int n, m;scanf("%d %d", &n, &m);for (int i = 1; i <= n; ++i) {for (int j = 1; j <= m; ++j) {scanf("%d", &arr[i][j]);if (arr[i][j] == 0) arr[i][j] = -1;}}prefix(n ,m);printf("%d", perfectNum(n, m));return 0;}波士顿房价预测
#include double nAvg(double arr[], int n) {double sum = 0;for (int i = 0; i < n; ++i) {sum += arr[i];}return sum / n;}int main() {int n;scanf("%d", &n);double x[n], y[n];for (int i = 0; i < n; ++i) {scanf("%lf %lf", &x[i], &y[i]);}double xBar = nAvg(x, n), yBar = nAvg(y, n);double sumUp = 0, sumDown = 0;for (int i = 0; i < n; ++i) {sumUp += (x[i] - xBar) * (y[i] - yBar);}for (int i = 0; i < n; ++i) {sumDown += (x[i] - xBar) * (x[i] - xBar);}double b = sumUp / sumDown;double a = yBar - b * xBar;printf("Y=%.4lf+%.4lf*X",a,b);return 0;}行列式值
#include #define MAX_SIZE 10void swapRows(double matrix[MAX_SIZE][MAX_SIZE], int row1, int row2, int n) {for (int i = 0; i < n; i++) {double temp = matrix[row1][i];matrix[row1][i] = matrix[row2][i];matrix[row2][i] = temp;}}double calculateDeterminant(double matrix[MAX_SIZE][MAX_SIZE], int n) {int i, j, k;double determinant = 1.0;for (i = 0; i < n; i++) {if (matrix[i][i] == 0.0) {for (j = i + 1; j < n; j++) {if (matrix[j][i] != 0.0) {swapRows(matrix, i, j, n);determinant *= -1.0;break;}}}if (matrix[i][i] == 0.0) {return 0.0;}double pivot = matrix[i][i];determinant *= pivot;for (j = i; j < n; j++) {matrix[i][j] /= pivot;}for (j = i + 1; j < n; j++) {double factor = matrix[j][i];for (k = i; k < n; k++) {matrix[j][k] -= factor * matrix[i][k];}}}return determinant;}int main() {int n;scanf("%d", &n);double matrix[MAX_SIZE][MAX_SIZE];for (int i = 0; i < n; i++) {for (int j = 0; j < n; j++) {scanf("%lf", &matrix[i][j]);}}double determinant = calculateDeterminant(matrix, n);printf("%.0lf\n", determinant);return 0;}#include #include int** init(int n) {int** matrix = (int**)malloc(sizeof(int*) * (n + 1));for(int i = 0; i <= n; i++) {matrix[i] = (int*)malloc(sizeof(int) * (n + 1));}return matrix;}int det(int **matrix, int n) {if (n == 1) return matrix[1][1];int sum = 0;int **subMatrix = init(n - 1);for (int i = 1; i <= n; ++i) {for (int j = 1; j <= n - 1; ++j) {for (int k = 1; k <= n - 1; ++k) {if (k < i) subMatrix[j][k] = matrix[j + 1][k];else subMatrix[j][k] = matrix[j + 1][k + 1];}}int sgn = i % 2 == 0 ? -1 : 1;sum += sgn * matrix[1][i] * det(subMatrix, n - 1);}return sum;}int main() {int n;scanf("%d", &n);int **matrix = init(n);for (int i = 1; i <= n; ++i) {for (int j = 1; j <= n; ++j) {scanf("%d", &matrix[i][j]);}}printf("%d", det(matrix, n));return 0;}货运优化
#include int main() {int l3s2[4] = {0, 5, 3, 1};int n, x1, x2, x3, x4, x5, x6, s2, s1;while (1) {scanf("%d %d %d %d %d %d", &x1, &x2, &x3, &x4, &x5, &x6);if ((x1 + x2 + x3 + x4 + x5 + x6) == 0) break;n = (x3 + 3) / 4 + x4 + x5 + x6;s2 = 5 * x4 + l3s2[x3 % 4];if (x2 > s2) n += (x2 - s2 + 8) / 9;s1 = 36 * n - 36 * x6 - 25 * x5 - 16 * x4 - 9 * x3 - 4 * x2;if (x1 > s1) n += (x1 - s1 + 35) / 36;printf("%d\n",n);}return 0;}素数筛法
#include #include #define NUM (int)1e7+1static bool isSieved[NUM];static int prime[NUM];int main() {int n, k = 0;scanf("%d", &n);isSieved[1] = true;for (int i = 2; i <= n; ++i) {if (!isSieved[i]) prime[++k] = i;for (int j = 1; prime[j] * i <= n; ++j) {isSieved[prime[j] * i] = true;if (i % prime[j] == 0) break;}}printf("%d", k);}51-60
字符串替换（WA）
删除前后缀
#include #include void strRemovePrefix(char *str, char *prefix) {int cnt = 0;char *pStr = str, *pPrefix = prefix;while (*pPrefix && *pStr && *pStr == *pPrefix) {while (*pPrefix && *pStr && *pStr == *pPrefix)++pStr, ++pPrefix, ++cnt;pPrefix = prefix;}int len = strlen(prefix);int mov = (cnt / len) * len;if (mov) memmove(str - mov, str, strlen(str) + 1);}void strRemoveSuffix(char *str, char *suffix) {int len = strlen(suffix);char *pStr = str + strlen(str) - len, *pSuffix = suffix;while (*pSuffix && pStr >= str && *pStr == *pSuffix) {int cnt = 0;while (*pSuffix && pStr && *pStr == *pSuffix)++pStr, ++pSuffix, ++cnt;if (cnt == len) {pSuffix = suffix, pStr = pStr - 2 * len;*(pStr + len) = '\0';} else break;}}int main() {char str1[1000] = "", fix[1000] = "", str2[1000] = "";scanf("%[^\n] %[^\n]", str1, fix);memcpy(str2, str1, strlen(str1) + 1);strRemovePrefix(str1, fix);puts(str1);strRemoveSuffix(str2, fix);puts(str2);return 0;}大小写交换
#include void strSwapCase(char str[]) {for (int i = 0; str[i] != '\0'; ++i) {if ('a' <= str[i] && str[i] <= 'z')str[i] = (char) str[i] - 'a' + 'A';else if ('A' <= str[i] && str[i] <= 'Z')str[i] = (char) str[i] - 'A' + 'a';}}int main() {char input[1000] = "";scanf("%[^\n]",input);strSwapCase(input);puts(input);return 0;}前后缀移除
#include #include void strLeftStrip(char *str, char *chars) {int mov = 0;char *pStr = str;while (*pStr) {if (strchr(chars, *pStr)) ++mov;else break;++pStr;}if (mov) memmove(str - mov, str, strlen(str) + 1);}void strRightStrip(char *str, char *chars) {int len = 0;char *pStr = str + strlen(str) - 1;while (pStr >= str) {if (strchr(chars, *pStr)) ++len;else break;--pStr;}*(str + strlen(str) - len) = '\0';}int main() {char str1[1000] = "", chars[1000] = "", str2[1000] = "";scanf("%[^\n] %[^\n]", str1, chars);memcpy(str2, str1, strlen(str1) + 1);strLeftStrip(str1, chars);puts(str1);strRightStrip(str2, chars);puts(str2);strRightStrip(str1, chars);puts(str1);return 0;}字符串后缀
#include #include void strEndsWith(char *str, char *suffix) {int len = strlen(suffix);char *pStr = str + strlen(str) - len, *pSuffix = suffix;while (*pSuffix && *pStr) {if (*pSuffix != *pStr) {printf("No\n");return;}else ++pSuffix, ++pStr;}printf("Yes\n");}int main() {char str[1000] = "", suffix[1000] = "";scanf("%[^\n] %[^\n]", str, suffix);strEndsWith(str, suffix);return 0;}Atol转换
#include #include int atol(char *str) {char *pStr = str;int sgn = 1;long long tmp = 0;if (*pStr == '+') ++pStr;else if (*pStr == '-') sgn = -1, ++pStr;while (*pStr) {if (*pStr == ' ') ;else if ('0' <= *pStr && *pStr = INT_MAX) return INT_MAX;else if ((tmp * sgn) <= INT_MIN) return INT_MIN;}else break;++pStr;}return tmp * sgn;}int main() {char str[1000] = "";scanf("%[^\n]", str);printf("%d", atol(str));return 0;}元宇宙A+B
#include #include const static char decToMeta[37] = "0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ";static char c[100] = "", a[100] = "", b[100] = "";static int C[100] = {0}, A[100] = {0}, B[100] = {0};int metaToDec(char m) {if ('0' <= m && m <= '9') return m - '0';return m - 'A' + 10;}void add(void) {int lenA = strlen(a), lenB = strlen(b);for (int i = 0; i < lenA; ++i) A[i] = metaToDec(a[lenA - i - 1]);for (int i = 0; i lenB ? lenA : lenB;for (int i = 0; i = 0; --i) c[i] = decToMeta[C[lenC - i - 1]];c[lenC] = '\0';}int main() {scanf("%s %s", a, b);add();puts(c);return 0;}字符串切片
#include #include int t, n, len;char str[1000];void strSlice(int begin, int end, int step) {char slice[1000] = "";int pos = 0;if (begin < 0) begin += len;if (end = begin && step > 0) {for (int i = begin; i < end; i += step) {slice[pos] = str[i];++pos;}} else if (end < begin && step end; i += step) {slice[pos] = str[i];++pos;}}puts(slice);}void mode(void) {len = strlen(str);int begin, end, step;switch (n) {case 3: {scanf("%d %d %d", &begin, &end, &step);break;}case 2: {scanf("%d %d", &begin, &end);step = 1;break;}case 1: {scanf("%d", &begin);end = len, step = 1;break;}}strSlice(begin, end, step);}int main() {scanf("%[^\n] %d", str, &t);for (int i = 0; i < t; ++i) {scanf("%d", &n);mode();}return 0;}分离字符串
#include #include void split(char *str, char *sep) {while (*str) {char *flag = strstr(str, sep);if (flag == NULL) break;char sub[101] = "";int len = flag - str;memcpy(sub, str, len);puts(sub);memmove(str - len - strlen(sep), str, strlen(str) + 1);}puts(str);}int main() {char str[2000] = "", sep[2000] = "";scanf("%[^\n] %[^\n]", str, sep);split(str, sep);return 0;}Kids A+B
#include #include char ans[30] = "";int strToNum(char *str) {if(strstr(str, "zero")) return 0;if(strstr(str, "ten")) return 10;if(strstr(str, "eleven")) return 11;if(strstr(str, "twelve")) return 12;if(strstr(str, "thirteen")) return 13;if(strstr(str, "fourteen")) return 14;if(strstr(str, "fifteen")) return 15;if(strstr(str, "sixteen")) return 16;if(strstr(str, "seventeen")) return 17;if(strstr(str, "eighteen")) return 18;if(strstr(str, "nineteen")) return 19;int unit = 0, decade = 0;if(strstr(str, "one")) unit = 1;if(strstr(str, "two")) unit = 2;if(strstr(str, "three")) unit = 3;if(strstr(str, "four")) unit = 4;if(strstr(str, "five")) unit = 5;if(strstr(str, "six")) unit = 6;if(strstr(str, "seven")) unit = 7;if(strstr(str, "eight")) unit = 8;if(strstr(str, "nine")) unit = 9;if(strstr(str, "twenty")) decade = 20;if(strstr(str, "thirty")) decade = 30;if(strstr(str, "forty")) decade = 40;if(strstr(str, "fifty")) decade = 50;if(strstr(str, "sixty")) decade = 60;if(strstr(str, "seventy")) decade = 70;if(strstr(str, "eighty")) decade = 80;if(strstr(str, "ninety")) decade = 90;return unit + decade;}void numToStr(int n) {switch (n) {case 0: {strcpy(ans, "zero");char *p = ans;return;}case 11: {strcpy(ans, "eleven");char *p = ans;return;}case 12: {strcpy(ans, "twelve");char *p = ans;return;}case 13: {strcpy(ans, "thirteen");char *p = ans;return;}case 14: {strcpy(ans, "fourteen");char *p = ans;return;}case 15: {strcpy(ans, "fifteen");char *p = ans;return;}case 16: {strcpy(ans, "sixteen");char *p = ans;return;}case 17: {strcpy(ans, "seventeen");char *p = ans;return;}case 18: {strcpy(ans, "eighteen");char *p = ans;return;}case 19: {strcpy(ans, "nineteen");char *p = ans;return;}default:break;}int decade = (n / 10) % 10, unit = n % 10;switch (decade) {case 2: {strcpy(ans, "twenty");break;}case 3: {strcpy(ans, "thirty");break;}case 4: {strcpy(ans, "forty");break;}case 5: {strcpy(ans, "fifty");break;}case 6: {strcpy(ans, "sixty");break;}case 7: {strcpy(ans, "seventy");break;}case 8: {strcpy(ans, "eighty");break;}case 9: {strcpy(ans, "ninety");break;}default: {break;}}if (decade && unit) strcat(ans, "-");switch (unit) {case 1: {strcat(ans, "one");break;}case 2: {strcat(ans, "two");break;}case 3: {strcat(ans, "three");break;}case 4: {strcat(ans, "four");break;}case 5: {strcat(ans, "five");break;}case 6: {strcat(ans, "six");break;}case 7: {strcat(ans, "seven");break;}case 8: {strcat(ans, "eight");break;}case 9: {strcat(ans, "nine");break;}default: {break;}}}int main() {char a[30] = "", b[30] = "";scanf("%s %s", a, b);numToStr(strToNum(a) + strToNum(b));puts(ans);return 0;}61-70
时钟A-B
#include #include int main(){struct tm begin = {0}, end = {0};scanf("%d %d %d", &begin.tm_year, &begin.tm_mon, &begin.tm_mday);scanf("%d %d %d", &end.tm_year, &end.tm_mon, &end.tm_mday);begin.tm_year -= 1900, begin.tm_mon -= 1;end.tm_year -= 1900, end.tm_mon -= 1;time_t tmBegin =mktime(&begin);time_t tmEnd = mktime(&end);printf("%.6lf", difftime(tmBegin, tmEnd));return 0;}加密字串
#include static int freq[26] = {0};int main() {char plain[8000] = "";int x;scanf("%s %d", plain, &x);for (int i = 0; plain[i]; ++i) ++freq[plain[i] - 'a'];char cipher[8000] = "";for (int i = 0; plain[i]; ++i) {if (freq[plain[i] - 'a'] & 1)cipher[i] = (char) (((plain[i] - 'a' - x) % 26 + 26) % 26 + 'a');elsecipher[i] = (char) ((plain[i] - 'a' + x) % 26 + 'a');}puts(cipher);return 0;}Arduino显示
#include static const int digit[10] = {6, 2, 5, 5, 4, 5, 6, 3, 7, 6};int getUnit(int num) {int cnt = 0;do {cnt += digit[num % 10];num /= 10;} while (num);return cnt;}int main() {int n;scanf("%d", &n);n -= 4;if (n <= 0) printf("0");else {int cnt = 0;for (int i = 0; i <= 1111; ++i) {for (int j = 0; j <= 1111; ++j) {if (getUnit(i) + getUnit(j) + getUnit(i + j) == n) ++cnt;}}printf("%d", cnt);}return 0;}有效表达式
#include int main() {long long n;scanf("%lld", &n);long long cnt = 1;for (long long i = n + 2; i <= 2 * n; ++i) cnt *= i;for (long long i = 1; i <= n; ++i) cnt /= i;printf("%lld", cnt);return 0;}长安
#include int bx, by, px, py, cnt;void dfs(int x, int y) {if ((x == px && y == py) || x > bx || y > by) return;if (x == bx && y == by) {++cnt;return;}dfs(x + 1, y);dfs(x, y + 1);}int main() {while (1) {fflush(stdin);scanf("%d %d %d %d", &bx, &by, &px, &py);if (bx <= 0 || by <= 0 || px <= 0 || py <= 0) break;cnt = 0;dfs(1, 1);printf("%d\n", cnt);}return 0;}GPS通信协议（CPP）
感谢Sekiro_2 提供的代码~
#include using namespace std;string out[100];int k=0;int check(string str){int i,result;for(result=str[1],i=2;str[i]!='*';i++){result^=str[i];}return result;}int convert(string str){int res=0;res=stoi(str,0,16);return res;}void convert_BeingTime(string utcTime){inthour=stoi(utcTime.substr(0,2));intB_hour=(hour+8)%24;if(B_hour/10==0)out[k++]="0"+to_string(B_hour)+":"+utcTime.substr(2,2)+":"+utcTime.substr(4,2);elseout[k++]=to_string(B_hour)+":"+utcTime.substr(2,2)+":"+utcTime.substr(4,2);}int main(){string str;while(cin>>str){if(str=="END") break;if(str.compare(0,6,"$GPRMC")==0){size_t asteriskPos = str.find('*');if(asteriskPos!=string::npos){int checksum=check(str);int senchecksum=convert(str.substr(asteriskPos + 1, 2));if(checksum!=senchecksum) {out[k++]="error";}else{string utcTime = str.substr(7, 6); convert_BeingTime(utcTime);}}}}for(int i=0;i<k;i++){cout<<out[i]<<endl;}}三元搜索
#include int terSearch(int arr[], int n, int k) {int left = 0, right = n - 1, mid1 = (n - 1) / 3, mid2 = n - mid1;while(mid1 != mid2) {if (k > arr[right] || k < arr[left]) return -1;if (k == arr[mid1]) return mid1;if (k == arr[mid2]) return mid2;if (mid1 == mid2) break;if (k arr[mid2]) left = mid2 + 1;else left = mid1 + 1, right = mid2 - 1;mid1 = left + (right - left) / 3, mid2 = right - (right - left) / 3;}return -1;}int main() {int n, k;scanf("%d", &n);int arr[n];for (int i = 0; i < n; ++i) scanf("%d", &arr[i]);scanf("%d", &k);printf("%d in [%d]", k, terSearch(arr, n, k));return 0;}DNA双螺旋结构
#include void putsDna1(){printf(" AT \n");printf("T--A\n");printf(" A----T \n");printf("T------A\n");printf("T------A\n");printf(" G----C \n");printf("T--A\n");printf(" GC \n");}void putsDna2(){printf(" CG \n");printf("C--G\n");printf(" A----T \n");printf("A------T\n");printf("T------A\n");printf(" A----T \n");printf("A--T\n");printf(" GC \n");}void putsDna3(){printf(" AT \n");printf("C--G\n");printf(" T----A \n");printf("C------G\n");printf("C------G\n");printf(" T----A \n");printf("G--C\n");printf(" AT \n");}int main() {int n;scanf("%d", &n);for (int i = 1; i <= n/2; ++i) {if (i % 3 == 1) putsDna1();else if (i % 3 == 2) putsDna2();else putsDna3();}return 0;}PID控制
#include typedef struct PIDController {double Kp, Ki, Kd;double preError, integral;} PIDData;double PIDCalculate(PIDData *pid, double setPoint, double measuredValue) {double error = setPoint - measuredValue;pid->integral += error;double differential = error - pid->preError;double output = pid->Kp * error + pid->Ki * pid->integral + pid->Kd * differential;pid->preError = error;return output;}int main() {double setPoint, measuredValue;int time;PIDData pid = {0};scanf("%lf %lf %lf", &pid.Kp, &pid.Ki, &pid.Kd);scanf("%lf %lf %d", &setPoint, &measuredValue, &time);for (int i = 1; i <= time; ++i) {double output = PIDCalculate(&pid, setPoint, measuredValue);measuredValue += output;printf("%d %.6lf\n", i, measuredValue);}return 0;}循环排序
#include void swap(int *a, int *b) {int tmp = *a;*a = *b, *b = tmp;}void cycleSort(int arr[], int n) {for (int i = 0; i < n - 1; ++i) {int item = arr[i], pos = i;for (int j = i + 1; j < n; ++j) if (arr[j] < item) ++pos;if (pos == i) continue;swap(&arr[pos], &item);while(pos != i) {pos = i;for (int j = i + 1; j < n; ++j) if (arr[j] < item) ++pos;while (item == arr[pos]) ++pos;swap(&arr[pos], &item);}}}int main() {int n;scanf("%d", &n);int arr[n];for (int i = 0; i < n; ++i) scanf("%d", &arr[i]);cycleSort(arr, n);for (int i = 0; i < n; ++i) printf("%d ", arr[i]);return 0;}71-80
卫星定位（WA）
热能计算
#include int main() {int Ti, Tf, cL, cV;double mL, mV;scanf("%d %d %lf %d %lf %d", &Ti, &Tf, &mL, &cL, &mV, &cV);double QL = cL * mL * (Tf - Ti);double QV = cV * mV * (Tf - Ti);double Q = QL + QV;printf("%.2lfkJ,%.2lf%%,%.2lf%%\n", Q / 1000, QV / Q, QL / Q);return 0;}/*20 800.250 41860.500 900*/几何约束
#include #include int maxi(int a, int b) {return a > b ? a : b;}int mini(int a, int b) {return a < b ? a : b;}int cross(int x1, int y1, int x2, int y2) {return x1 * y2 - y1 * x2;}bool insert(int line1[4], int line2[4]) {if (maxi(line2[0], line2[2]) < mini(line1[0], line1[2]) ||maxi(line1[0],line1[2]) < mini(line2[0], line2[2]) ||maxi(line2[1], line2[3]) < mini(line1[1], line1[3]) || maxi(line1[1], line2[3]) 0 ||cross(line2[2] - line2[0], line2[3] - line2[1], line1[0] - line2[0], line1[1] - line2[1]) *cross(line2[2] - line2[0], line2[3] - line2[1], line1[2] - line2[0], line1[3] - line2[1]) > 0) return false;return true;}int main() {int n;scanf("%d", &n);int line[n][4];for (int i = 0; i < n; ++i)for (int j = 0; j < 4; ++j) scanf("%d", &line[i][j]);int cnt = 0;for (int i = 0; i < n; ++i) {for (int j = i + 1; j < n; ++j) {if (insert(line[i], line[j])) {printf("X: #%d #%d\n", i + 1, j + 1);++cnt;}}}printf("n=%d\n", cnt);return 0;}/*51 5 4 52 5 10 13 2 10 36 4 9 47 1 8 1*/日出日落时间（WA）
中位数
#include int arr[1000];double mid(int n) {if (n & 1) return arr[n / 2];return (arr[n / 2] + arr[n / 2 - 1]) / 2.0f;}int main() {int flag, cnt = 0;while(1) {scanf("%d", &flag);if (flag == -1) break;while (1) {if (flag == 0) {for (int i = 0; i < cnt; ++i) printf("%d ", arr[i]);printf("%.6lf\n", mid(cnt));break;}arr[cnt++] = flag;scanf("%d", &flag);}}return 0;}原子计数（CPP）
感谢Cubeist提供的代码~
#include #include 成绩单
#include #include #include typedef struct tag {long long id;char name[31];int score;} ST;void load(ST* arr[], int n) {for (int i = 0; i id, arr[i]->name, &arr[i]->score);}}void sort(ST* arr[], int n) {ST* tmp = NULL;for (int i = 0; i < n; ++i) {bool isSwapped = false;for (int j = 0; j score score) ||(arr[j]->score == arr[j + 1]->score && arr[j]->id > arr[j + 1]->id))tmp = arr[j], arr[j] = arr[j + 1], arr[j + 1] = tmp, isSwapped = true;if (!isSwapped) break;}}void traverse(ST* arr[], int n) {for (int i = 0; i id, arr[i]->name, arr[i]->score);}int main() {int n;scanf("%d", &n);ST* grade[n];load(grade, n);sort(grade, n);traverse(grade, n);return 0;}/*62001900001 Jerry 882001900005 Tom 922001900006 Milla 852001900002 Alice 802001900003 Mickey 852001900004 Aladdin 83*/水下声学定位
#include#includeint main(){const double pi = 3.1415926f;double a, b, c, d, diag;scanf("%lf %lf %lf %lf %lf", &a, &b, &c, &d, &diag);double p = (a + b + diag) / 2, q = (c + d + diag);double s = sqrt(p * (p - a) * (p - b) * (p - diag)) + sqrt(q * (q - c) * (q - d) * (q - diag));double angle = atan((4 * s) / (pow(b, 2) + pow(d, 2) - pow(a, 2) - pow(c, 2)));angle *= 180 / pi;printf("%.6lf %.1lf", s, angle);}火箭发射模拟（CPP）
感谢De1ta_Zer0提供的代码~
#include #include const double timeStep = 0.1; int main(){double totalMass, rocketMass, burnTime, cE, g;std::cin >> totalMass >> rocketMass >> burnTime >> cE >> g;double propellantMass = totalMass - rocketMass;double massFlow = propellantMass / burnTime;double T = massFlow * cE;double altitude = 0, V = 0;double timeLeft = burnTime + timeStep;while(timeLeft >= 0){double a = T / totalMass;double deltaV = a * timeStep;double deltaAltitude = V * timeStep;double deltaM = massFlow * timeStep;V += deltaV;altitude += deltaAltitude;totalMass -= deltaM;timeLeft -= timeStep;}std::cout << std::fixed << std::setprecision(3) << altitude / 1000 << "km" << std::endl;return 0;}晶体结构（CPP）
感谢De1ta_Zer0提供的代码~
#include #include #include #include struct Atom{std::string name;double mass;double APF;double r;}; Atom elemList[] ={{ "Po", 208.998, 0.52360, 1.68 },{ "Li", 6.941, 0.68017, 1.52 },{ "Na", 22.989770, 0.68017, 1.86 },{ "Cr", 51.9961, 0.68017, 1.28 },{ "Mn", 54.938049, 0.68017, 1.27 },{ "Fe",55.845, 0.68017, 1.26 },{ "Mo", 95.94, 0.68017, 1.39 },{ "Ta",180.9749, 0.68017, 1.46 },{ "Al", 26.981538, 0.74048, 1.43 },{ "Ca",40.078, 0.74048, 1.97 },{ "Ni", 58.6934, 0.74048, 1.24 },{ "Cu",63.546, 0.74048, 1.28 },{ "Ge", 72.64, 0.74048, 1.22 },{ "Ag",107.8682, 0.74048, 1.44 },{ "Pt", 195.078, 0.74048, 1.39 },{ "Au", 196.96655, 0.74048, 1.44 },{ "Pb", 207.2, 0.74048, 1.75 }}; template double pow(double a) { return a * pow(a); } template double pow(double a) { return 1; } int main(){ int n;std::cin >> n;for (int i = 0; i > in;for(const auto& e : elemList){if(e.name == in){double V = 4.0 * M_PI * pow(e.r) / 3.0;std::cout << std::fixed << std::setprecision(2) << 10.0 * e.mass * e.APF / 6.022 / V << std::endl;break;}}}return 0;}81-90
上楼梯
#include #include int main() {int n, m;scanf("%d %d", &n, &m);long long dp[n + 1];memset(dp, -1, (n + 1) * sizeof(long long));for (int i = 0; i < m; ++i) {int tmp;scanf("%d", &tmp);dp[tmp] = 0;}dp[1] = dp[1] ? 1 : 0;dp[2] = dp[2] ? (dp[1] ? 2 : 1) : 0;for (int i = 3; i <= n; ++i)if(dp[i]) dp[i] = (dp[i - 1] + dp [i - 2]) % (long long) (1e9 + 7);printf("%lld\n", dp[n]);return 0;}绝对差
#include #include #include #include void quickSort(int arr[], int left, int right) {if (left >= right) return;srand(time(NULL));int idx = rand() % (left - right) + left;int flag = arr[idx], head = left - 1, tail = right + 1;while (head < tail) {do head++; while(arr[head] flag);if (head < tail) {int tmp = arr[head];arr[head] = arr[tail];arr[tail] = tmp;}}quickSort(arr, left, tail);quickSort(arr, tail + 1, right);}int minAbsSub(int arr[], int n) {int min = INT_MAX;for (int i = 0; i < n - 1; ++i) {int tmp = arr[i + 1] - arr[i];if (tmp < min) min = tmp;}return min;}int main() {int n;scanf("%d", &n);int arr[n];for (int i = 0; i < n; ++i) scanf("%d", &arr[i]);quickSort(arr, 0, n - 1);printf("%d", minAbsSub(arr, n));return 0;}挑选
#include #include #include #include void quickSort(long long arr[], long long left, long long right) {if (left >= right) return;srand(time(NULL));long long idx = rand() % (left - right) + left;long long flag = arr[idx], head = left - 1, tail = right + 1;while (head < tail) {do head++; while(arr[head] flag);if (head < tail) {long long tmp = arr[head];arr[head] = arr[tail];arr[tail] = tmp;}}quickSort(arr, left, tail);quickSort(arr, tail + 1, right);}long long maxi(long long arr[], long long n) {long long max = LLONG_MIN;for (long long i = 0; i < n; ++i)if (max < arr[i]) max = arr[i];return max;}long long sumMax(long long arr[], long long n) {long long dp[n];dp[0] = arr[0];for (long long i = 1; i (arr[i] + dp[i - 1]) ? dp[i - 1] : (arr[i] + dp[i - 1]);else {long long j = i - 1;while (j >= 0 && arr[j] >= arr[i] - 1) --j;dp[i] = arr[i] + (j >= 0 ? dp[j] : 0);}}return maxi(dp, n);}int main() {long long n;scanf("%lld", &n);long long arr[n];for (long long i = 0; i < n; ++i) scanf("%lld", &arr[i]);quickSort(arr, 0, n - 1);printf("%lld\n", sumMax(arr, n));return 0;}三角形
#include #include #include void quickSort(int arr[], int left, int right) {if (left >= right) return;srand(time(NULL));int idx = rand() % (left - right) + left;int flag = arr[idx], head = left - 1, tail = right + 1;while (head < tail) {do head++; while(arr[head] flag);if (head 1; --i)if (arr[i] < arr[i - 1] + arr[i - 2]) {printf("%d %d %d\n", arr[i - 2], arr[i - 1], arr[i]);return;}printf("-1\n");}int main() {int n;scanf("%d", &n);int arr[n];for (int i = 0; i < n; ++i) scanf("%d", &arr[i]);quickSort(arr, 0, n - 1);findTri(arr, n);return 0;}子数组最大和
#include #include int maxSum(int arr[], int n) {int dp[n];memset(dp, 0, n * sizeof(int));int maxi = arr[0];dp[0] = arr[0];for (int i = 1; i (dp[i - 1] + arr[i]) ? arr[i] : (dp[i - 1] + arr[i]);maxi = dp[i] > maxi ? dp[i] : maxi;}return maxi;}int main() {int n;scanf("%d", &n);int arr[n];for (int i = 0; i < n; ++i) scanf("%d", &arr[i]);printf("%d\n", maxSum(arr, n));return 0;}和字符串
#include #include #include long long substrToNum(char str[], int pos, int len) {long long num = 0;for (int i = 0; i = strLen) return true;long long num1 = substrToNum(str, begin, len1);long long num2 = substrToNum(str, begin + len1, len2);long long num3 = substrToNum(str, begin + len1 + len2, getLen(num1 + num2));if (num1 + num2 == num3) return backTracking(str, strLen, begin + getLen(num1), getLen(num2), getLen(num3));return false;}void partition(char str[]) {int strLen = strlen(str);for (int i = 1; i <= strLen / 2; ++i) {if (backTracking (str, strLen, 0, i, i)) {printf("true\n");return;}}printf("false\n");}int main() {char str[1000] = "";scanf("%s", str);partition(str);return 0;}汤包
#include #include #include typedef struct {int guest;int end;} Tag;void quickSort(Tag* arr[], int left, int right) {if (left >= right) return;srand(time(NULL));int idx = rand() % (left - right) + left;int flag = arr[idx]->end, head = left - 1, tail = right + 1;while (head end end > flag);if (head < tail) {Tag *tmp = arr[head];arr[head] = arr[tail];arr[tail] = tmp;}}quickSort(arr, left, tail);quickSort(arr, tail + 1, right);}void traverse(Tag *arr[], int n) {for (int i = 0; i guest);}int main() {int n;scanf("%d", &n);Tag *arr[n];for (int i = 0; i guest = i + 1;int begin, duration;scanf("%d %d", &begin, &duration);arr[i]->end = begin + duration;}quickSort(arr, 0, n -1);traverse(arr, n);return 0;}打字机
#include #include long long dp[100];long long seg[100] = {0};long long method(char str[]) {memset(dp, -1, 100 * sizeof(long long));char *iter = str;int part = 0, ans = 1;seg[part] = 1;while (*iter) {if (*iter == 'm' || *iter == 'w') return 0;if (*iter == 'n' && *(iter + 1) == 'n') {int cnt = 1;dp[0] = 1, dp[1] = 2, iter += 2;while(*iter == 'n') {++cnt, ++iter;dp[cnt] = dp[cnt - 1] + dp[cnt - 2];}seg[++part] = dp[cnt];}else if (*iter == 'u' && *(iter + 1) == 'u') {int cnt = 1;dp[0] = 1, dp[1] = 2, iter += 2;while(*iter == 'u') {++cnt, ++iter;dp[cnt] = dp[cnt - 1] + dp[cnt - 2];}seg[++part] = dp[cnt];}else ++iter;}for (int i = 0; seg[i] ; ++i) ans *= seg[i];return ans;}int main() {char str[1000];scanf("%s", str);printf("%lld", method(str));return 0;}游乐园
#include #include #include int dist[12][12];int n, m;bool pass[12];int ans = -1;bool check(int v, int u) {return !pass[u] && dist[v][u] != 0x3f3f3f3f;}bool noway(int v) {for (int i = 0; i l ? ans : l;return;}for (int i = 0; i < n; ++i) {if (check(v, i) && i != v) {pass[i] = true;backTracking(i, l + dist[v][i]);pass[i] = false;}}}int main() {scanf("%d %d", &n, &m);memset(dist, 0x3f, sizeof(dist));for (int i = 0; i < n; ++i) dist[i][i] = 0;while (m) {int v, u, l;scanf("%d %d %d", &v, &u, &l);v -= 1, u -= 1;dist[v][u] = dist[v][u] < l ? dist[v][u] : l;dist[u][v] = dist[v][u], --m;}for (int i = 0; i < n; ++i) {memset(pass, 0, sizeof(pass));pass[i] = true;backTracking(i, 0);}printf("%d\n", ans);return 0;}危险的组合（CPP）
感谢Cubeist提供的代码~
#include using namespace std;long long w[] = {0, 0, 0, 1, 3, 8, 20, 47, 107, 238, 520, 1121,2391, 5056, 10616, 22159, 46023, 95182, 196132, 402873, 825259,1686408, 3438828, 6999071, 14221459, 28853662, 58462800,118315137, 239186031, 483072832, 974791728};int main(){int n;while (cin >> n, n){if (n <= 0) exit(0);cout << w[n] << endl;}return 0;}91-100 考试模拟
【循环】圆周率 
#include double pi(int n) {double sum = 3.0f;for (int i = 2; i <= n; ++i) {double sgn = i % 2 ? -1.0f : 1.0;sum += sgn * 4 / (2 * i * (2 * i - 1) * (2 * i - 2));}return sum;}int main() {int n;scanf("%d", &n);printf("%.7lf\n", pi(n));return 0;}【选择】马赫数
#include #include void mach(double v, double T) {double m = (v / 3.6f) / (331.3f * sqrt(1 + T / 273.15f));printf("%.3lf ", m);if (m - 0.8f < 1e-6) printf("subsonic\n");else if (m - 1.2f < 1e-6) printf("transonic\n");else if (m - 5.0f < 1e-6) printf("supersonic\n");else printf("hypersonic\n");}int main() {double v, T;scanf("%lf %lf", &v, &T);mach(v, T);return 0;}【IO】气体扩散
#include #include double rate(double m1, double m2) {return sqrt(m2 / m1);}int main() {double m1, m2;scanf("%lf %lf", &m1, &m2);printf("%.4lf\n", rate(m1, m2));return 0;}【字符串】左右操作
#include #include void quickSort(char str[], int left, int right) {if (left >= right) return;char flag = str[(left + right) / 2];int head = left - 1, tail = right + 1;while (head flag);do tail--; while (str[tail] < flag);if (head < tail) {char tmp = str[head];str[head] = str[tail], str[tail] = tmp;}}quickSort(str, left, tail);quickSort(str, tail + 1, right);}void reverse(char str[], int begin, int end) {int head = begin, tail = end;while (head <= tail) {char tmp = str[head];str[head] = str[tail], str[tail] = tmp;++head, --tail;}}int main() {char str[1005] = "";scanf("%s", str);int len = strlen(str);quickSort(str, 0, len / 2 - 1);int mid = (len & 1) ? (len /2 + 1) : (len / 2);reverse(str, mid, len - 1);printf("%s", str);return 0;}【结构体】空中交通管制
#include #include #include typedef struct {char id[64];int x;int y;} Plane;int main() {int n;scanf("%d", &n);Plane *plane[n];for (int i = 0; i id, &plane[i]->x, &plane[i]->y);}double minDist = 1e9;int idx1, idx2;for (int i = 0; i < n - 1; ++i) {for (int j = i + 1; j x - plane[j]->x, 2) +pow(plane[i]->y - plane[j]->y, 2));if (dist id, plane[idx2]->id, minDist);return 0;}/*6UA057 2 3AA044 12 30BA1534 40 50DL262 5 1AF001 12 10SK837 3 4*/【数组】重复元素
#include int arr[1005] = {0};int main() {int n, cnt = 0;scanf("%d", &n);for (int i = 0; i < n; ++i){scanf("%d", &arr[i]);for (int j = 0; j < i; ++j)if (arr[i] == arr[j]) {++cnt;break;}}printf("%d\n", cnt);}//10 1 10 20 1 25 1 10 30 25 1【文件】平方根
#include #include int main() {int n;scanf("%d", &n);FILE *fp1 = fopen("rr.dat", "w");for (int i = 1; i <= n; ++i)fprintf(fp1, "%.6lf ", sqrt(i));fclose(fp1);FILE *fp2 = fopen("rr.dat", "r");for (int i = 1; i <= n; ++i) {double output;fscanf(fp2, "%lf", &output);printf("%.6lf ", output);}fclose(fp2);return 0;}【算法】零钞
#include int main() {int s;scanf("%d", &s);int cnt[4], r = s;cnt[0] = r / 10, r -= cnt[0] * 10;cnt[1] = r / 5, r -= cnt[1] * 5;cnt[2] = r / 2, cnt[3] = r - cnt[2] * 2;if (cnt[3]) printf("1=%d\n", cnt[3]);if (cnt[2]) printf("2=%d\n", cnt[2]);if (cnt[1]) printf("5=%d\n", cnt[1]);if (cnt[0]) printf("10=%d\n", cnt[0]);return 0;}【枚举】机场翻牌显示
#include #include int cnt(char src, char dest) {if (src == dest) return 0;if (isupper(src))return (src < dest) ? (dest - src) : ('Z' - src + dest - 'A' + 1);if ('0' <= src && src dest) ? (src - dest) : (src - '0' + '9' + 1 - dest + 1);*/return (src < dest) ? (dest - src) : ('9' - src + dest - '0' + 1);}return -1;}int main() {char id1[10] = "", id2[10] = "";scanf("%s %s", id1, id2);int num = 0;for (int i = 0; id1[i] && id2[i] ; ++i) num += cnt(id1[i], id2[i]);printf("%d\n", num);return 0;}【递归】阿克曼数
#include int ack(int m, int n) {if (m == 0) return n + 1;if (n == 0) return ack(m - 1, 1);return ack(m - 1, ack(m, n -1));}int main() {int m, n;scanf("%d %d", &m, &n);printf("%d\n", ack(m, n));return 0;}