C51–OLED

GME12864-12

OLED写入指令数据：

1、start（）开始
2、slave address 存积地址：011110 xx
写入：b 0111 1000 （0x78）（R / W位置为0时，表示写入）
3、ACK
4、cotrol byte：(Co) (D / C)000000

（Co置为0时，接下来传输的信息包含数据字节data byte）（D / C位置为0时，表示为命令；为 1 时，表示为数据）0000 0000 写入命令0100 0000 写入数据

5、ACK
6、写入指令/数据
7、ACK
8、STOP

//写入命令void Oled_Write_Cmd(char dataCmd){ICC_Start();//1、start（）开始IIC_Send_Byte(0x78);//2、slave address存积地址：011110 xx//写入：b 0111 1000（0x78）（R/W位置为0时，表示写入）ICC_ACK();//3、ACKIIC_Send_Byte(0x00);//4、cotrol byte：(Co) (D/C)000000//（Co置为0时，接下来传输的信息包含数据字节data byte）//（D / C位置为0时，表示为命令；为 1 时，表示为数据）//0000 0000 写入命令//0100 0000 写入数据ICC_ACK();//5、ACKIIC_Send_Byte(dataCmd); //6、写入指令/数据ICC_ACK();//7、ACKICC_Stop();//8、STOP}//写入数据void Oled_Write_Data(char dataData){ICC_Start();//1、start（）开始IIC_Send_Byte(0x78);//2、slave address存积地址：011110 xx//写入：b 0111 1000（0x78）（R/W位置为0时，表示写入）ICC_ACK();//3、ACKIIC_Send_Byte(0x40);//4、cotrol byte：(Co) (D/C)000000//（Co置为0时，接下来传输的信息包含数据字节data byte）//（D / C位置为0时，表示为命令；为 1 时，表示为数据）//0000 0000 写入命令//0100 0000 写入数据ICC_ACK();//5、ACKIIC_Send_Byte(dataData);//6、写入指令/数据ICC_ACK();//7、ACKICC_Stop();//8、STOP}

OLED显示点：

VDD = 1.65V——3.3V
VCC = 7V —— 15V

128×64个点阵组成：

64=8Page*8bit自动右移横向：SEG0——SEG127竖向：Page0——Page7

寻址模式：

页地址模式：

水平横向寻址，写到127时，他会返回到该行的头部。

1、发送cmd：0x20
2、发送cmd：0x02；（默认为页模式）

水平地址模式：

水平横向寻址，写到127时，他会返回到下一行的头部

垂直地址模式：

竖向寻址，到尾部时，会返回下一列的头部继续

页模式：显示一个点

配置页地址模式：
Oled_Write_Cmd(0x20)；
Oled_Write_Cmd(0x02)；
配置显示地址：
Oled_Write_Cmd(0xB0);//配置page1-8
Oled_Write_Cmd(0x00);//列地址，从头开始
Oled_Write_Cmd(0x10);

主函数：
1、OLED初始化
2、选择一个位置
2.1、确认为页面寻址模式

Oled_Write_Cmd(0x20)；Oled_Write_Cmd(0x02)；

2.2、选择PAGE0

Oled_Write_Cmd(0xB0);//1011 0000（0xB0）配置page1-8.

3、显示一个点

#include "reg52.h"#include "intrins.h"sbit SCL = P0^1;sbit SDA = P0^3;void ICC_Start(){SDA = 1;SCL = 1;_nop_();//一个nop用时5usSDA = 0;_nop_();}void ICC_Stop(){SDA = 0;SCL = 1;_nop_();SDA = 1;_nop_();}char ICC_ACK(){char flag;SDA = 1;//在时钟脉冲9期间释放_nop_();SCL = 1;_nop_();flag = SDA;_nop_();SCL = 0;_nop_();return flag;}void IIC_Send_Byte(char dataSend){int i;for(i = 0;i < 8;i++){SCL = 0;//SCL低电平，让SDA做好数据准备SDA = dataSend & 0x80;//与上1000 0000 获得dataSend的最高位，给SDA_nop_();//发送数据建立的时间SCL = 1;//SCL高电平，开始发送数据_nop_();//发送数据需要时间SCL= 0;//发送完毕，SCL拉回低电平_nop_();dataSend = dataSend << 1;}}//写入命令void Oled_Write_Cmd(char dataCmd){ICC_Start();//1、start（）开始IIC_Send_Byte(0x78);//2、slave address存积地址：011110 xx//写入：b 0111 1000（0x78）（R/W位置为0时，表示写入）ICC_ACK();//3、ACKIIC_Send_Byte(0x00);//4、cotrol byte：(Co) (D/C)000000//（Co置为0时，接下来传输的信息包含数据字节data byte）//（D / C位置为0时，表示为命令；为 1 时，表示为数据）//0000 0000 写入命令//0100 0000 写入数据ICC_ACK();//5、ACKIIC_Send_Byte(dataCmd); //6、写入指令/数据ICC_ACK();//7、ACKICC_Stop();//8、STOP}//写入数据void Oled_Write_Data(char dataData){ICC_Start();//1、start（）开始IIC_Send_Byte(0x78);//2、slave address存积地址：011110 xx//写入：b 0111 1000（0x78）（R/W位置为0时，表示写入）ICC_ACK();//3、ACKIIC_Send_Byte(0x40);//4、cotrol byte：(Co) (D/C)000000//（Co置为0时，接下来传输的信息包含数据字节data byte）//（D / C位置为0时，表示为命令；为 1 时，表示为数据）//0000 0000 写入命令//0100 0000 写入数据ICC_ACK();//5、ACKIIC_Send_Byte(dataData);//6、写入指令/数据ICC_ACK();//7、ACKICC_Stop();//8、STOP}void Oled_Init(){Oled_Write_Cmd(0xAE);//--display offOled_Write_Cmd(0x00);//---set low column addressOled_Write_Cmd(0x10);//---set high column addressOled_Write_Cmd(0x40);//--set start line addressOled_Write_Cmd(0xB0);//--set page addressOled_Write_Cmd(0x81); // contract controlOled_Write_Cmd(0xFF);//--128Oled_Write_Cmd(0xA1);//set segment remapOled_Write_Cmd(0xA6);//--normal / reverseOled_Write_Cmd(0xA8);//--set multiplex ratio(1 to 64)Oled_Write_Cmd(0x3F);//--1/32 dutyOled_Write_Cmd(0xC8);//Com scan directionOled_Write_Cmd(0xD3);//-set display offsetOled_Write_Cmd(0x00);//Oled_Write_Cmd(0xD5);//set osc divisionOled_Write_Cmd(0x80);//Oled_Write_Cmd(0xD8);//set area color mode offOled_Write_Cmd(0x05);//Oled_Write_Cmd(0xD9);//Set Pre-Charge PeriodOled_Write_Cmd(0xF1);//Oled_Write_Cmd(0xDA);//set com pin configuartionOled_Write_Cmd(0x12);//Oled_Write_Cmd(0xDB);//set VcomhOled_Write_Cmd(0x30);//Oled_Write_Cmd(0x8D);//set charge pump enableOled_Write_Cmd(0x14);//Oled_Write_Cmd(0xAF);//--turn on oled panel}void main(){Oled_Init();//OLED初始化Oled_Write_Cmd(0x20);//选择一个位置，确认为页面寻址模式Oled_Write_Cmd(0x02);Oled_Write_Cmd(0xB0);//1011 0000（0xB0）配置page1-8.//显示一个点while(1);}

页模式：显示字符

选择列地址显示
主函数：
1、OLED初始化
2、选择一个位置
2.1、确认为页面寻址模式

Oled_Write_Cmd(0x20)；Oled_Write_Cmd(0x02)；

2.2、选择PAGE0

Oled_Write_Cmd(0xB0);//1011 0000（0xB0）配置page1-8.Oled_Write_Cmd(0x00);//列地址，从头开始Oled_Write_Cmd(0x10);

3、显示屏写入数据

用点阵液晶取模工具取模
要勾选纵向取模，文字倒序

显示字符A：

#include "reg52.h"#include "intrins.h"sbit SCL = P0^1;sbit SDA = P0^3;void ICC_Start(){SCL = 0;//防止雪花屏SDA = 1;SCL = 1;_nop_();//一个nop用时5usSDA = 0;_nop_();}void ICC_Stop(){SCL = 0;//防止雪花屏SDA = 0;SCL = 1;_nop_();SDA = 1;_nop_();}char ICC_ACK(){char flag;SDA = 1;//在时钟脉冲9期间释放_nop_();SCL = 1;_nop_();flag = SDA;_nop_();SCL = 0;_nop_();return flag;}void IIC_Send_Byte(char dataSend){int i;for(i = 0;i < 8;i++){SCL = 0;//SCL低电平，让SDA做好数据准备SDA = dataSend & 0x80;//与上1000 0000 获得dataSend的最高位，给SDA_nop_();//发送数据建立的时间SCL = 1;//SCL高电平，开始发送数据_nop_();//发送数据需要时间SCL= 0;//发送完毕，SCL拉回低电平_nop_();dataSend = dataSend << 1;}}//写入命令void Oled_Write_Cmd(char dataCmd){ICC_Start();//1、start（）开始IIC_Send_Byte(0x78);//2、slave address存积地址：011110 xx//写入：b 0111 1000（0x78）（R/W位置为0时，表示写入）ICC_ACK();//3、ACKIIC_Send_Byte(0x00);//4、cotrol byte：(Co) (D/C)000000//（Co置为0时，接下来传输的信息包含数据字节data byte）//（D / C位置为0时，表示为命令；为 1 时，表示为数据）//0000 0000 写入命令//0100 0000 写入数据ICC_ACK();//5、ACKIIC_Send_Byte(dataCmd); //6、写入指令/数据ICC_ACK();//7、ACKICC_Stop();//8、STOP}//写入数据void Oled_Write_Data(char dataData){ICC_Start();//1、start（）开始IIC_Send_Byte(0x78);//2、slave address存积地址：011110 xx//写入：b 0111 1000（0x78）（R/W位置为0时，表示写入）ICC_ACK();//3、ACKIIC_Send_Byte(0x40);//4、cotrol byte：(Co) (D/C)000000//（Co置为0时，接下来传输的信息包含数据字节data byte）//（D / C位置为0时，表示为命令；为 1 时，表示为数据）//0000 0000 写入命令//0100 0000 写入数据ICC_ACK();//5、ACKIIC_Send_Byte(dataData);//6、写入指令/数据ICC_ACK();//7、ACKICC_Stop();//8、STOP}void Oled_Init(void){Oled_Write_Cmd(0xAE);//--display offOled_Write_Cmd(0x00);//---set low column addressOled_Write_Cmd(0x10);//---set high column addressOled_Write_Cmd(0x40);//--set start line addressOled_Write_Cmd(0xB0);//--set page addressOled_Write_Cmd(0x81); // contract controlOled_Write_Cmd(0xFF);//--128Oled_Write_Cmd(0xA1);//set segment remapOled_Write_Cmd(0xA6);//--normal / reverseOled_Write_Cmd(0xA8);//--set multiplex ratio(1 to 64)Oled_Write_Cmd(0x3F);//--1/32 dutyOled_Write_Cmd(0xC8);//Com scan directionOled_Write_Cmd(0xD3);//-set display offsetOled_Write_Cmd(0x00);//Oled_Write_Cmd(0xD5);//set osc divisionOled_Write_Cmd(0x80);//Oled_Write_Cmd(0xD8);//set area color mode offOled_Write_Cmd(0x05);//Oled_Write_Cmd(0xD9);//Set Pre-Charge PeriodOled_Write_Cmd(0xF1);//Oled_Write_Cmd(0xDA);//set com pin configuartionOled_Write_Cmd(0x12);//Oled_Write_Cmd(0xDB);//set VcomhOled_Write_Cmd(0x30);//Oled_Write_Cmd(0x8D);//set charge pump enableOled_Write_Cmd(0x14);//Oled_Write_Cmd(0xAF);//--turn on oled panel}//清屏void Oled_Clear(){int i,j;//unsigned char i,j;char范围-128——127，定义char类型会产生越界for(i = 0;i < 8;i++){Oled_Write_Cmd(0xB0 + i);//Page0——Page7Oled_Write_Cmd(0x00);//每个Page从0开始Oled_Write_Cmd(0x10);for(j = 0;j < 128;j++){//0——127列，依次写入0，每写入数据列地址自动偏移。Oled_Write_Data(0);}}}/*--文字:A--*//*--宋体12;此字体下对应的点阵为：宽x高=8x16 (一个Page为8位)--*/char A1[8] = {0x00,0x00,0xC0,0x38,0xE0,0x00,0x00,0x00};char A2[8] = {0x20,0x3C,0x23,0x02,0x02,0x27,0x38,0x20};void main(){int i;Oled_Init();//OLED初始化Oled_Write_Cmd(0x20);//选择一个位置，确认为页面寻址模式Oled_Write_Cmd(0x02);Oled_Clear();//清屏Oled_Write_Cmd(0xB0);//1011 0000（0xB0）配置page1-8.//显示一个点Oled_Write_Cmd(0x00);//列地址，从头开始Oled_Write_Cmd(0x10);for(i = 0;i < 8;i++){Oled_Write_Data(A1[i]);}Oled_Write_Cmd(0xB1);Oled_Write_Cmd(0x00);Oled_Write_Cmd(0x10);for(i = 0;i < 8;i++){Oled_Write_Data(A2[i]);}while(1);}

各数据类型大小和取值范围：https://blog.csdn.net/weixin_42856843/article/details/81989737

页模式：显示图片

大小：128x64像素保存模式：bmp模式

位图（Bitmap）模式：它没有进行数据压缩，其内部存储的色彩信息（灰度图，RGB 或 ARGB）直接以二进制的形式暴露在外，也十分方便借助计算机软件进行简单或深入的分析。

#include "reg52.h"#include "intrins.h"sbit SCL = P0^1;sbit SDA = P0^3;void ICC_Start(){SCL = 0;//防止雪花屏SDA = 1;SCL = 1;_nop_();//一个nop用时5usSDA = 0;_nop_();}void ICC_Stop(){SCL = 0;//防止雪花屏SDA = 0;SCL = 1;_nop_();SDA = 1;_nop_();}char ICC_ACK(){char flag;SDA = 1;//在时钟脉冲9期间释放_nop_();SCL = 1;_nop_();flag = SDA;_nop_();SCL = 0;_nop_();return flag;}void IIC_Send_Byte(char dataSend){int i;for(i = 0;i < 8;i++){SCL = 0;//SCL低电平，让SDA做好数据准备SDA = dataSend & 0x80;//与上1000 0000 获得dataSend的最高位，给SDA_nop_();//发送数据建立的时间SCL = 1;//SCL高电平，开始发送数据_nop_();//发送数据需要时间SCL= 0;//发送完毕，SCL拉回低电平_nop_();dataSend = dataSend << 1;}}//写入命令void Oled_Write_Cmd(char dataCmd){ICC_Start();//1、start（）开始IIC_Send_Byte(0x78);//2、slave address存积地址：011110 xx//写入：b 0111 1000（0x78）（R/W位置为0时，表示写入）ICC_ACK();//3、ACKIIC_Send_Byte(0x00);//4、cotrol byte：(Co) (D/C)000000//（Co置为0时，接下来传输的信息包含数据字节data byte）//（D / C位置为0时，表示为命令；为 1 时，表示为数据）//0000 0000 写入命令//0100 0000 写入数据ICC_ACK();//5、ACKIIC_Send_Byte(dataCmd); //6、写入指令/数据ICC_ACK();//7、ACKICC_Stop();//8、STOP}//写入数据void Oled_Write_Data(char dataData){ICC_Start();//1、start（）开始IIC_Send_Byte(0x78);//2、slave address存积地址：011110 xx//写入：b 0111 1000（0x78）（R/W位置为0时，表示写入）ICC_ACK();//3、ACKIIC_Send_Byte(0x40);//4、cotrol byte：(Co) (D/C)000000//（Co置为0时，接下来传输的信息包含数据字节data byte）//（D / C位置为0时，表示为命令；为 1 时，表示为数据）//0000 0000 写入命令//0100 0000 写入数据ICC_ACK();//5、ACKIIC_Send_Byte(dataData);//6、写入指令/数据ICC_ACK();//7、ACKICC_Stop();//8、STOP}void Oled_Init(void){Oled_Write_Cmd(0xAE);//--display offOled_Write_Cmd(0x00);//---set low column addressOled_Write_Cmd(0x10);//---set high column addressOled_Write_Cmd(0x40);//--set start line addressOled_Write_Cmd(0xB0);//--set page addressOled_Write_Cmd(0x81); // contract controlOled_Write_Cmd(0xFF);//--128Oled_Write_Cmd(0xA1);//set segment remapOled_Write_Cmd(0xA6);//--normal / reverseOled_Write_Cmd(0xA8);//--set multiplex ratio(1 to 64)Oled_Write_Cmd(0x3F);//--1/32 dutyOled_Write_Cmd(0xC8);//Com scan directionOled_Write_Cmd(0xD3);//-set display offsetOled_Write_Cmd(0x00);//Oled_Write_Cmd(0xD5);//set osc divisionOled_Write_Cmd(0x80);//Oled_Write_Cmd(0xD8);//set area color mode offOled_Write_Cmd(0x05);//Oled_Write_Cmd(0xD9);//Set Pre-Charge PeriodOled_Write_Cmd(0xF1);//Oled_Write_Cmd(0xDA);//set com pin configuartionOled_Write_Cmd(0x12);//Oled_Write_Cmd(0xDB);//set VcomhOled_Write_Cmd(0x30);//Oled_Write_Cmd(0x8D);//set charge pump enableOled_Write_Cmd(0x14);//Oled_Write_Cmd(0xAF);//--turn on oled panel}//清屏void Oled_Clear(){int i,j;//unsigned char i,j;char范围-128——127，定义char类型会产生越界for(i = 0;i < 8;i++){Oled_Write_Cmd(0xB0 + i);//Page0——Page7Oled_Write_Cmd(0x00);//每个Page从0开始Oled_Write_Cmd(0x10);for(j = 0;j < 128;j++){//0——127列，依次写入0，每写入数据列地址自动偏移。Oled_Write_Data(0);}}}code unsigned char bmpImager[] = {/*--调入了一幅图像：12864演示图片.bmp--*//*--宽度x高度=128x64（有128x8x8个数据）--*/0x00,0x00,0x80,0xC0,0xE0,0xF0,0xF0,0xF8,0xF8,0xF8,0xF8,0xF8,0xF8,0xF8,0xF0,0xF0,0xF0,0xE0,0xE0,0x60,0x70,0x70,0x30,0x30,0x38,0x18,0x18,0x18,0x18,0x18,0x18,0x1C,0x0C,0x1C,0x1C,0x1C,0x18,0x18,0x18,0x18,0x18,0x30,0x30,0x30,0x60,0x60,0xE0,0xE0,0xE0,0xF0,0xF8,0xF8,0xF8,0xF8,0xF8,0xF8,0xF8,0xF8,0xF0,0xF0,0xE0,0xC0,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3E,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x7F,0x1F,0x1F,0x07,0x07,0x03,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x01,0x03,0x07,0x0F,0x1F,0x3F,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x7F,0x7F,0x00,0x00,0x00,0x00,0x00,0xF0,0xF0,0x70,0x30,0x30,0x30,0xF0,0xE0,0x00,0x00,0x40,0xE0,0x70,0x30,0x30,0x30,0x70,0xF0,0xE0,0x00,0x00,0x00,0xF0,0xF0,0x70,0x30,0x30,0x70,0xF0,0xE0,0x00,0x00,0xC0,0xE0,0x70,0x30,0x30,0x30,0x30,0x74,0xFF,0xFF,0x00,0x00,0x00,0xE0,0xF0,0x30,0x30,0x30,0x70,0xF0,0xE0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x03,0x07,0x0F,0x1F,0xFF,0xFF,0x0F,0x01,0x00,0x00,0x00,0x80,0xE0,0xF0,0xF8,0xF8,0xFC,0xFC,0x7E,0x7E,0x7E,0xFE,0xFC,0xF8,0x60,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0xF8,0xFC,0xFC,0xFE,0x7E,0xFE,0xFC,0xF8,0xF8,0xF0,0xE0,0x80,0x00,0x00,0x00,0x01,0x0F,0xFF,0xFF,0x1F,0x0F,0x07,0x03,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0x60,0x60,0xE0,0x60,0x7F,0x3F,0x02,0x00,0x38,0x7D,0xFE,0x66,0xE6,0x66,0x76,0x7F,0x7F,0x00,0x00,0x00,0x7F,0x7F,0x00,0x00,0x00,0x00,0x7F,0x7F,0x00,0x00,0x1F,0x3F,0x7A,0x60,0xE0,0xE0,0x60,0x78,0x7F,0x7F,0x00,0x00,0x38,0x7D,0x7F,0xE6,0x46,0x66,0x76,0x7F,0x7F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0xFF,0xE0,0x00,0x00,0x00,0x3E,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x7F,0x1F,0x03,0x00,0x00,0x00,0x60,0xF0,0xF8,0xF8,0xF8,0xF0,0xF0,0x70,0x00,0x00,0x00,0x07,0x3F,0x7F,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x7F,0x00,0x00,0x80,0xE0,0xFF,0x3F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x07,0x07,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x03,0x0F,0x1C,0x38,0x60,0xE0,0xC1,0x81,0x83,0x03,0x03,0x01,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x03,0x03,0x83,0x83,0x83,0xC1,0xE0,0x70,0x38,0x1C,0x0F,0x03,0x80,0x80,0xA0,0xB0,0xB8,0xFC,0xF7,0xF7,0x92,0x94,0xDC,0xF8,0xD0,0xC0,0x40,0x00,0x00,0x00,0xC0,0xC2,0x46,0xFC,0x40,0x00,0x10,0x70,0xC7,0x9E,0xC0,0xFE,0x1C,0x00,0x00,0x00,0x00,0x00,0x00,0x08,0xF0,0xA0,0xB0,0xB3,0xFF,0xB2,0x90,0xB0,0xF0,0x38,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x80,0x84,0x84,0x84,0x86,0xB6,0xE6,0x96,0x8E,0x86,0x86,0xC0,0xC0,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x3F,0xFF,0xFF,0x7F,0xFE,0xFE,0xFE,0xFE,0xFE,0xFE,0x7C,0x0C,0x0C,0x0C,0x0C,0x0C,0x0C,0x0C,0x0C,0x0C,0x0C,0x0C,0x0C,0xFC,0xFC,0xFE,0xFE,0xFE,0xFE,0xFF,0x7F,0xFF,0xFF,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x10,0x18,0x89,0x8C,0x96,0xB7,0xD5,0xD6,0xD6,0xD6,0xDF,0xD7,0xCE,0x5C,0x18,0x18,0x08,0x00,0x00,0x00,0x00,0x40,0x7F,0xB0,0xD8,0x6C,0x30,0x19,0x0F,0x1F,0x78,0xE0,0xC0,0xC0,0x00,0x00,0x00,0x00,0x08,0x1F,0x0C,0x0D,0x0C,0x7F,0xC4,0x84,0x86,0x87,0x80,0xF0,0xF0,0xF0,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x01,0x31,0x60,0xC0,0xFF,0x3F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0x7F,0xF8,0xE1,0xE1,0xC1,0xC1,0x81,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x01,0xC1,0x81,0xC1,0xE1,0xF5,0xFE,0x1F,0x01,0x00,0x00,0xE0,0xC0,0x60,0x60,0xC0,0xC0,0x00,0x01,0xE1,0xC1,0x61,0x61,0xC1,0xC1,0x81,0x01,0x01,0xE1,0xE0,0x60,0x60,0xC0,0x80,0x00,0x60,0xF8,0xF8,0x40,0x01,0xC1,0xE0,0x60,0x60,0xE0,0xC0,0x00,0x01,0xFD,0xF9,0x00,0xF8,0xFC,0x80,0xC0,0xE0,0x60,0x00,0x00,0x00,0x01,0x01,0x01,0xC1,0xC1,0x61,0x61,0x61,0xE0,0xC0,0x00,0xC0,0xE0,0x60,0x60,0x60,0xC0,0x00,0x01,0xE1,0xE0,0x60,0x60,0xE0,0xC0,0x60,0x60,0xE0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x03,0x0F,0x0F,0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x03,0x07,0x03,0x03,0x03,0x03,0x02,0x03,0x03,0x07,0x0F,0x1F,0x1F,0x1F,0x1F,0x1F,0x0F,0x07,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0x10,0x30,0x1F,0x0F,0x00,0x00,0xFF,0xBC,0x10,0x30,0x1F,0x1F,0x0F,0x00,0x22,0xFF,0x18,0x10,0x10,0x1F,0x0F,0x00,0x00,0x1F,0x1F,0x10,0x08,0x1E,0x1E,0x13,0x1B,0x1F,0x1F,0x00,0x00,0x1F,0x1F,0x00,0x1F,0x1F,0x03,0x07,0x1E,0x18,0x00,0x00,0x18,0x18,0x00,0x04,0x0F,0x1D,0x30,0x10,0x10,0x1C,0x1C,0x00,0x0F,0x1F,0x10,0x30,0x18,0x1F,0x07,0x00,0x1F,0x1F,0x00,0x00,0x1F,0x1F,0x00,0x00,0x1F,};void Oled_Show_Image(unsigned char *image){unsigned int j;unsigned char i;//char范围-128——127，定义char类型会产生越界for(i = 0;i < 8;i++){Oled_Write_Cmd(0xB0 + i);//Page0——Page7Oled_Write_Cmd(0x00);//每个Page从0开始Oled_Write_Cmd(0x10);for(j = 128 * i;j < (128 * (i + 1));j++){//0——127列，依次写入0，每写入数据列地址自动偏移。Oled_Write_Data(image[j]);}}}void main(){Oled_Init();//OLED初始化Oled_Write_Cmd(0x20);//选择一个位置，确认为页面寻址模式Oled_Write_Cmd(0x02);Oled_Clear();//清屏Oled_Show_Image(bmpImager);while(1);}